Why CYCLEAN?
Due to water shortage phenomena, governments in many countries are trying to strictly control business units to conform to the environmental laws. Especially, construction companies are required to take responsibility for keeping environment clean.
CYCLEAN series are developed to minimize water contamination from many construction and industrial sites.
CYCLEAN can prevent land, stream and underground water from being contaminated by excavation site, soil erosion by rain, etc.
CYCLEAN Principle
Contaminated raw water is fed by submersible pump
When sensor detects inflow, flocculating chemical is supplied automatically
Through vortex system, raw water is separated into flocks and liquid by rotational and gravitational effect.
Treated clean water is discharged through piping
CYCLEAN Performance
Turbidity : The degree to which the water loses its transparency.
Its unit is NTU. 1L of water contains 1mg of suspended particles (1NTU = 1ppm).
CYCLEAN Model Line-up
CYCLEAN Treating Process
Static mixer
Pipe reactor
Clarifier
Discharge
It is compact so it can be installed on a small space (width 2.2 x length 2.1m)
It can treat high-concentration wheel-washing water and wastewater/turbid water at low maintenance cost (20 ~ 40m3/h)
It is integrated equipment so it is easy to move and install. It is operated fully automatically.
It discharges or reuses rapidly purified treated wastewater as water for washing wheel.
Various applicable sites: Construction sites, cement factories, tunnel construction sites, etc
Applications of CYCLEAN
CYCLEAN for discharge purposes
CYCLEAN for water re-cycle purposes
