GEOWELL WASH INTRODUCTON
The GEOWELL WASH wheel washing system offers a highly effective solution to reduce dust and debris generated by
vehicles entering and exiting construction sites, quarries, landfills, and other industrial facilities.
WHY GEOWELL WASH?
Rising dust from various type of sites exists as minute particle in the air, turning the environment near the sites, desolate.
It may cause serious respiratory system related complications. Moreover, clay and mud that stick to the wheels contaminate the roads near your site, resulting in greater rising dust as the vehicles pass through.
The GEOWELL WASH Series are the best choice that can solve these problem. They have monolithic structures and can be easily installed.
The products give solutions that fit in your working sites via various models and options.
GEOWELL-WASH series are the innovative and simple solutions that can reduce track out, dirt and dust problem.
Our system significantly reduces labor cost and amount of water required since it does not require an operator.
All the processes ranging from sensor detection to sludge discharge, pump back washing and supply of tire washing water are fully automatic.
Variety of GEOWELL-WASH series that suit the characteristics of individual fields help to enhance the environment near the sites since it is installed at various sites including the sites located in the urban areas to construct buildings, civil engineering sties, cement plants, quarries and garbage reclamation sites in line with consumer demand.
Moreover, it enhances companies’ image by significantly reducing the claims placed by the residents
How to operate GEOWELL WASH?
STEP-01
SENSOR THE VEHICLE
Move the vehicle to the point of sensors.
Wait for 3-4 seconds in front of the washing system so that the sensor can sense the vehicle.
STEP-02
WHEEL WASHING
When the nozzles start to spray water, move the vehicle slowly onto the washing system.
Maintain speed of 5km/h.
If the vehicle is heavily polluted, you can repeat the washing
by reversing the vehicle and making a re-entry.
STEP-03
FINISH WASHING AND EXIT
When the washing is finished, you can drive out of the washing system onto the road.
Never try to control the steering wheel because a collision is a possibility until you get clear of the washing system completely.
When the washing system stops spraying, compressed air of the air compressor will be automatically released onto the pump screen and remove the foreign substance for a pre-programmed time before the scraper activates to discharge the sludge from the washing system.
Applications of GEOWELL WASH
GEOWELL-WASH has a wide range of applications based on the types and conditions of sites.
